Frequently Asked Questions About Frt-15
Is the FRT-15 legal?
The legal status of the FRT-15 trigger is complex and fluid. It is currently the subject of ongoing litigation with the ATF. You must verify the current legal status in your jurisdiction before purchasing. For a detailed breakdown, see our complete legal and operational guide to the FRT-15.
How does the FRT-15 work?
It’s a forced reset trigger. The recoil of the firearm forces the trigger forward to reset, allowing for a very rapid rate of fire with a single, continuous pull. It’s a mechanical system, not electronic.
What’s the price for an FRT-15 trigger?
Expect to pay between $350 and $450, depending on the retailer and current availability. It’s a premium component. You can browse our full catalog for current pricing and stock.
Is installation difficult?
If you’re comfortable with a standard AR-15 trigger swap, you can install it. It requires basic tools and patience to ensure the anti-walk pins and springs are correctly seated. We recommend following a detailed video guide.
Will the FRT-15 fit my AR pistol or SBR?
Yes, it’s designed for the standard AR-15/M16 fire control group pocket. It will fit most AR-platform rifles, pistols, and SBRs that use a mil-spec lower receiver.
What parts do I need to install it?
You need the trigger unit itself, which includes the proprietary hammer. You’ll also need anti-walk pins, which are often included. Standard AR-15 disconnector and trigger springs are used. Find compatible springs and pins in our AR-15 parts category.
How reliable is it?
When installed correctly with a properly gassed upper, reliability is generally high. It can be ammunition and lubrication-sensitive. Running it wet with quality 5.56 ammo tends to yield the best results.
Do you ship to all states?
No. Due to state laws and the item’s status, we cannot ship the FRT-15 trigger to several states, including California, New York, New Jersey, and Washington. Always check your local laws first.
How is this different from a binary trigger?
A binary fires one round on pull and one on release. The FRT-15 uses forced reset for a much faster, simulated automatic rate of fire with one continuous pull. The feel and legal arguments are distinct. We break down the details in this FRT-15 vs binary trigger comparison.
What maintenance does it require?
Keep it clean and well-lubricated. Carbon buildup on the trigger and hammer contact surfaces can impede function. A thorough cleaning every 500-1000 rounds is a good practice.
Will it work with a .22 LR conversion kit?
Typically, no. Most .22 LR conversion kits lack the bolt mass and energy to reliably force the trigger to reset. It’s designed for centerfire rifle cartridges.
Can I use my existing hammer?
No. The FRT-15 system includes a proprietary hammer that is integral to its function. You must use the hammer provided in the package.
Does it come with anti-walk pins?
Most retail packages do include anti-walk pins, but you should confirm with the specific seller. They are strongly recommended for safe operation of the FRT-15.
What buffer weight should I use?
A standard carbine buffer (H1) is often sufficient, but tuning your buffer system to your specific upper receiver’s gas is key. An over-gassed system can improve reliability, while an under-gassed one will cause failures.
Is there a warranty?
Warranties are provided by the manufacturer, Rare Breed Triggers. Given the legal situation, warranty service and support can be unpredictable. Purchase from a reputable dealer like P80 Kit for a verified product.
Why is it sometimes out of stock?
Production is limited due to legal battles, and demand consistently exceeds supply. When batches are released, they sell out quickly. Setting up in-stock notifications is your best bet.
Can it cause a slam fire?
If improperly installed or with excessive wear, the potential exists, as with any trigger. Ensuring the disconnector is functioning correctly during installation is critical to prevent this.